Ford Performance E Camshaft, Hydraulic Roller, Ford 5.0

Ford Performance E Camshaft, Hydraulic Roller, Ford 5.0

The legendary E303 cam developed by Ford Performance for the 5.0L Fox-body Mustang. This cam provides a noticeable power improvement and lumpy idle while maintaining good driveability with a manual transmission. Works well with carburetors or mass air fuel injection.

• Fits 1985 and later 302 roller cam blocks
• Will also fit 1963-1984 non-roller cam 289-302 blocks when used with hydraulic roller lifters
• Will also fit 1994-1997 351W blocks with factory roller cam
• Will also fit 1969-1993 non-roller cam 351W blocks when used with hydraulic roller lifters
• Requires upgraded valve springs
• Valve spring requirements: 120 lbs valve seat pressure minimum 295 lbs open
• On EFI engines, performance camshafts work only with mass air induction systems. Will not work with Explorer EEC-V EFI or speed density EFI systems
• Also fits 1994-97 351W with factory roller cam when used with mass air EFI
• Stock 5.0L HO cam advertised specs are 266 degree/266 degree duration, 0.444"/0.444" lift

Reviews

Ask a question about this product

Name:

Email:

Question:

Please enter the characters you see in the image:
New image